Get to Know YS3606 DimmerFob (Q&As)

Q: What is the YoLink YS3606 DimmerFob?
A: The YoLink YS3606 DimmerFob is a handheld remote control that is designed to work with YoLink Dimmer Switches, by YoLink Control Tech.
Q: How is the YoLink YS3606 DimmerFob powered?
A: The YoLink YS3606 DimmerFob is powered by two standard alkaline AAA batteries, which are included in the Fob.
Q: What is the wireless range of the YoLink YS3606 DimmerFob?
A: The YoLink YS3606 DimmerFob is designed with LoRa long-range/low-power technology, which allows for up to 1000 feet of open-air wireless range, so you can control Dimmer Switch by DimmerFob within 1000 feet.
Q: What are the button features of the YoLink YS3606 DimmerFob?
A: The YoLink YS3606 DimmerFob has four buttons: an ON button that turns one light switch or a group of light switches on to the previous brightness, a Brightness UP button that increments one light switch or a group of light switches to the next higher brightness level, a Brightness DOWN button that increments one light switch or a group of light switches to the next lower brightness level, and an OFF button that turns one light switch or a group of light switches off.
Q: Can the YoLink YS3606 DimmerFob control more than one light switch?
A: Yes, the YoLink YS3606 DimmerFob can control more light switches.
Q: What is the battery life of the YoLink YS3606 DimmerFob?
A: The YoLink YS3606 Dimmer Fob is designed with LoRa long-range/low-power technology, which offers 5+ years of standby battery life.
Q: What is the temperature range for the YoLink YS3606 DimmerFob?
A: The YoLink YS3606 DimmerFob can be used within a temperature range of -4°F – 122°F (-20°C - 50°C).
Q: How to replace batteries for the YoLink dimmer fob?
A: To replace the batteries for the YoLink YS-3606 Dimmer Fob, follow these steps:
Turn the fob over and locate the battery cover on the back.
Use a small screwdriver or similar tool to gently pry open the battery cover.
Remove the old batteries from the fob.
Insert two new standard alkaline AAA batteries into the battery compartment, making sure to match the polarity of the batteries with the markings inside the compartment.
Close the battery cover by gently pressing it back into place until it clicks shut.
Note: Always use fresh, high-quality batteries to ensure the best performance from your YoLink YS3606 DimmerFob. When replacing the batteries, be sure to dispose of the old batteries properly according to local regulations.

Get to Know YS3606 DimmerFob (Q&As)

Was this article helpful?

Comments