Get to Know YS3607 SirenFob (Q&As)

Thomas
Thomas
  • Updated
  • Q: What is the YoLink YS3607 SirenFob?
    A: The YoLink YS3607 SirenFob is a handheld device that can be used to control YoLink siren products, such as the Siren Alarm or Alarm Controller, through Control-D2D device-to-device pairing.
  • Q: What are the general features of the YoLink YS3607 SirenFob?
    A: The YoLink YS3607 SirenFob features four buttons for controlling YoLink siren products, a keyring loop, and is battery-powered using two standard alkaline AAA batteries (included). It uses LoRa long-range/low-power technology, offering a 5+ standby year battery life and up to 1000 feet open-air wireless range.
  • Q: What are the button features of the YoLink YS3607 SirenFob?
    A: The YoLink YS3607 SirenFob features a siren activate button, a siren deactivate button, a disarm button, and an arm button. The siren activate button turns on the paired siren(s), the siren deactivate button silences the paired siren(s), the disarm button prevents the siren from activating due to the activation of any paired security devices, and the arm button activates the siren(s) if any paired security devices trigger an alarm response.
  • Q: What is the warranty for the YoLink YS3607 SirenFob?
    A: The YoLink YS3607 SirenFob comes with a 2-year warranty.
  • Q: How do I pair my YoLink SirenFob to a YoLink siren device?
    A: To pair your YoLink SirenFob to a YoLink siren device, press and hold the Start Alarm button on the SirenFob for 5 to 10 seconds until the LED flashes green. Then, on the siren device, press and hold the SET button for 5 to 10 seconds until the status LED flashes green. Repeat this process for each additional siren device as needed.
  • Q: Can I pair my SirenFob to more than one siren device?
    A: Yes, you can pair your SirenFob to multiple YoLink siren devices as needed. Simply follow the pairing process for each device.
  • Q: How do I test my SirenFob after pairing it to a siren device?
    A: To test your SirenFob, press the Start Alarm button to turn on the paired siren(s), then press the Deactivate button to silence the siren(s).
  • Q: How do I prevent YoLink alarm devices from activating the siren with my SirenFob?
    A: To prevent YoLink alarm devices from activating the siren with your SirenFob, use the Disarm button to prevent the siren from activating due to the activation of any paired security devices. Use the Arm button to activate the siren if any paired security devices trigger an alarm response. You can also use the Mute/Unmute buttons to prevent or allow alarm devices from activating the siren.

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.